Phoenix atex

P1000 - ATEX Diaphragm Pump

Fluid connections: 3” BSPP – DN 80
Air connection: 3/4” BSPP
Max. Flow rate: 1050 lt/min
Max air pressure: 8 bar
Max delivery head: 80 m

Max Suction Lift Dry: 5 m
Max Solid passing: 12 mm
Noise level: 82 dB
Max Viscosity: 55.000 cps
Material: PP+CF e PVDF+CF

ATEX CERTIFICATION

Certificazione EX - Fluimac - Pumps we trust
Certificazione CE - Fluimac - Pumps we trust
Certificazione UKCA - Fluimac - Pumps we trust
Certificazione IECEX- Fluimac - Pumps we trust

Performance

PERFORMANCE CURVES

To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory:

The required flow rate of the fluid (Flow rate l/min)

The total prevalence (Head H)

By determining the flow rate of the fluid (Flow rate lt/min) and the head (Head H) it is possible to identify a point of intersection between the two. This point allows you to identify the quantity of compressed air necessary for the correct functioning of this type of pump; to do this it is necessary to follow the blue curve to the left. Then following the closest green curve you can see the air consumption.

Materials available

PP+CF

Temperature: -20°C +95°C

Fluimac - Pumps we trust

PVDF+CF

Temperature: -20°C +95°C

ALU

Temperature: -20°C +95°C

SS

Temperature: -20°C +95°C

Ask for advice

Do you need support in choosing the double diaphragms pump most in line with your specific fluid handling needs?

Fill out the form below and you will be contacted by our staff.

The best solutions, certified

Certificazione CE - Fluimac - Pumps we trust
Certificazione EX - Fluimac - Pumps we trust
Certificazione UKCA - Fluimac - Pumps we trust
Certificazione - Fluimac - Pumps we trust
Certificazione FDA COMPLIANT - Fluimac - Pumps we trust
Certificazione IECEX- Fluimac - Pumps we trust