Home » Drum transfer pumps

Drum transfer pumps

Neptune

Fluimac’s NEPTUNE drum transfer pumps represent a reliable and versatile solution for transferring fluids from drums and containers.

Designed for continuous and uninterrupted operation, NEPTUNE pumps include multiple types of tubes and motors to meet the needs of various industrial sectors, ensuring high performance and maximum adaptability in different applications.

The offer is completed by a vast range of accessories to customize the pumps according to demand, optimizing efficiency and safety in the management of a wide range of fluids, including neutral, aggressive and non-flammable liquids.

Application sectors of drum transfer pumps

Wide choice of flow rates and materials depending on the situations and fluids used.

High performance thanks to an optimal and functional design.

Suitable for a wide range of fluids and applications.

Rugged construction and chemical-resistant materials.

Designed for continuous, uninterrupted operation.

Polypropylene (PP)

Suitable for neutral, aggressive and non-flammable liquids. Used specifically for pumping aggressive chemicals such as acids, alkalis or detergents.
Driveshaft: 316 Stainless Steel or Hastelloy 2.4610.
Maximum temperature: 50°C.

Polyvinylidene fluoride (PVDF)

Particularly suitable for highly aggressive liquids such as acids and concentrated bases.
Driveshaft: Hastelloy 2.4610.
Maximum temperature: 90°C.

Aluminum (Alu)

Suitable for neutral and non-flammable liquids. Ideal for mineral oil products with a maximum viscosity of 1,000 mPas.
Driveshaft: 316 Stainless Steel.
Maximum temperature: 90°C.

316 Ti Stainless Steel

Used for all neutral, slightly aggressive liquids such as diluted acids, alkalines or detergents and thin fluid foods.
Driveshaft: 316 Stainless Steel.
Maximum temperature: 90°C.

N-180

230 Volt, 50/60 Hz, 640 Watt, IP 24

N-280

230 Volt, 50/60 Hz, 825 Watt, IP 24,

N-ARIA 1

300 Watt at max operating pressure 6 bar, IBEX U05 ATEX B007

N-460

230 Volt, 50/60 Hz, 640 Watt, IP 55, II 2G Ex db IIC T6 Gb

N-04

Pump Material: Polypropylene
Shaft: Polypropylene
Seals: depending on the support
Range: approx. 0.3 l/stroke*
Hose connection: ¾”
The telescopic suction tube is adjustable from 500 to 950 mm and has a max diameter. 34mm.

N-08

Pump material: PVDF
Seals: PTFE
Flow rate: 0.3 l/rev*
Suction hose length: 3 x 35 cm
Pump complete with discharge arc and adapter for G 2" drums. Regular lubrication with PTFE is required.

N-13

Material: cast iron pump body
Seals: NBR
Flow rate: 0.25 l/rev*
Pump tube diameter: 53mm
Suction hose length: 1000 mm
Therefore suitable for smaller containers and 200 liter drums. Pump complete with discharge arc and adapter for G 2" drums.

N-16

Fire brigade version with flexible suction hose instead of a rigid hose. Suction hose DN 19 x 4; 1.5m
Drain pipe DN 19 x 4; 1.5m
Range: approx. 0.25 l/stroke*
Drum adapters with M 64x4 and G 2” are integrated into the pump housing, allowing for easy attachment in the drum.